Publikationen von A. Brendel

Zivelonghi, A.; Weitkamp, T.; Riesch, J.; di Michiel, M.; Scheel, M.; Larrue, A.; Nawka, S.; Brendel, A.; Kieback, B.; You, J.-H.: High Resolution Synchrotron Tomography and Numerical Modeling of Strongly Absorbing W-based Heterostructures. European Congress and Exhibition on Advanced Materials and Processes (Euromat 2011), Montpellier (2011)

Adelhelm, C.; Brendel, A.; Hodgson, E. R.; Malo, M.; Morono, A.: Radiation Induced Conductivity for Er₂O₃ coatings on EUROFER under 1.8 MeV electron irradiation. 13th International Workshop on Plasma-Facing Materials and Components for Fusion Applications / 1st International Conference on Fusion Energy Materials Science (13th PFMC Workshop / 1st FEMaS Conference), Rosenheim (2011)

Brendel, A.; Werkstetter, M.; Adelhelm, C.; Linsmeier, C.: Phase formation of Erbia coatings on Eurofer, phase stability and deuterium permeability. 13th International Workshop on Plasma-Facing Materials and Components for Fusion Applications / 1st International Conference on Fusion Energy Materials Science (13th PFMC Workshop / 1st FEMaS Conference), Rosenheim (2011)

Kimmig, S.; Brendel, A.: Sigma fibre reinforced copper for heat sink application. 13th International Workshop on Plasma-Facing Materials and Components for Fusion Applications / 1st International Conference on Fusion Energy Materials Science (13th PFMC Workshop / 1st FEMaS Conference), Rosenheim (2011)

Schöbel, M.; Degischer, H. P.; Brendel, A.; Wimpory, R. C.; Di Michiel, M.: Thermal stresses and fatigue damage in monofilament reinforced copper composites for heat sink applications in divertor elements. 13th International Workshop on Plasma-Facing Materials and Components for Fusion Applications / 1st International Conference on Fusion Energy Materials Science (13th PFMC Workshop / 1st FEMaS Conference), Rosenheim (2011)

Zivelonghi, A.; Weitkamp, T.; Riesch, M.; di Michiel, M.; Scheel, M.; Brendel, A.; Nawka, S.; You, J.-H.: Characterization of Two Microstructured Graded Joints for W-armored PFC via Synchrotron Tomography and Numerical Modeling. 13th International Workshop on Plasma-Facing Materials and Components for Fusion Applications / 1st International Conference on Fusion Energy Materials Science (13th PFMC Workshop / 1st FEMaS Conference), Rosenheim (2011)

Nawka, S.; Schubert, T.; Brendel, A.; Zivelonghi, A.; You, J. H.; Kieback, B.: Synthesis, characterization and FEM-simulation of W/CuCrZr-Composites for extreme thermal applicants. Powder Metallurgy World Congress & Exhibition (PM2010), Florence (2010)

Zivelonghi, A.; Brendel, A.; Nawka, S.; You, J. H.: Microstructure-Based Finite Element Simulations of Heterogeneous Tungsten Materials. 14th International Conference on Fusion Reactor Materials (ICFRM-14), Sapporo (2009)

Brendel, A.; Paffenholz, V.; Köck, T.: SiC fibre reinforced copper as heat sink material - a comparison of SCS 6 and SCS 0 fibres. New Congress "Materials Science and Engineering" (MSE 2008), Nürnberg (2008)

Paffenholz, V.; Brendel, A.: SiC-Fibre reinforced Copper as Heat Sink Material for Fusion Applications. Fachbeirat, Garching (2008)

Köck, T.; Brendel, A.; Bolt, H.: Influence of different deposition parameters on the performance of a Ti-Ta-C interface layer in silicon carbide-copper metal-matrix composites. 1st International Conference on New Materials for Extreme Environments (ExtreMat), San Sebastian (2008)

Paffenholz, V.; Brendel, A.; Lindig, S.; Bolt, H.: Synthesis and analysis of the thermal behavior of SiC-fibre reinforced copper matrix composites as heat sink material. 1st International Conference on New Materials for Extreme Environments (ExtreMat), San Sebastian (2008)

Brendel, A.; Köck, T.; Bolt, H.; Popescu, C.: Novel Composite Heat Sink Material for the Divertor of Future Fusion Reactors. 12th International Conference on Fusion Reactor Materials (ICFRM-12), Santa Barbara,CA (2005)

Levchuk, S.; Lindig, S.; Brendel, A.; Bolt, H.: Interface reactions and control of diffusion at the interface between SiC fibres and EUROFER 97. 12th International Conference on Fusion Reactor Materials (ICRFM-12), Santa Barbara,CA (2005)

Köck, T.; Brendel, A.; Popescu, C.; Bolt, H.; Schurmann, H.: Silicon Carbide Reinforced Copper as a Heat Sink Material for Future Fusion Reactors. European Congress on Advanced Materials and Processes (EUROMAT 2005), Prague (2005)

Levchuk, S.; Lindig, S.; Brendel, A.; Bolt, H.: Influence of W and Re Interlayers on the Interface between SiC Fibers and 9Cr Steel Matrix. European Congress on Advanced Materials and Processes (EUROMAT 2005), Prague (2005)

Pippel, E.; Woltersdorf, J.; Brendel, A.; Bolt, H.-H.: Copper/SiC Heat Sink Materials: Optimisation by Ttitanium as Coupling Agent. European Congress on Advanced Materials and Processes (EUROMAT 2005), Prague (2005)

Levchuk, S.; Brendel, A.; Lindig, S.; Bolt, H.: Investigation of the interface reactions between silicon carbide fibres and 9Cr steel matrix. 15. Symposium: Verbundwerkstoffe und Werkstoffverbunde, Kassel (2005)

Levchuk, S.; Brendel, A.; Maier, H.; Bolt, H.: Development on thin films for the control of interface properties of SiC-fibre / steel composites. 9th International Conference on Plasma Surface Engineering (PSE 2004), Garmisch-Partenkirchen (2004)

Popescu, C.; Brendel, A.; Leyens, C.; Bolt, H.: Metal matrix composites as heat sink material for fusion applications. 8th European Congress on Advanced Materials and Processes (EUROMAT 2003), Lausanne (2003)